Tuning for Technostar & Trekstor e-scooters TES 200 / EG3168 / EG3178 – chip up to 35 km/h – speed limit removal – speed unlock.

SpeedChip Once the digital tuning unit is installed, you can remove the 20 km/h speed limit required in Germany by the Ordinance on Small Electric Vehicles (eKFV) by pressing the odometer button 6 times.
Easy installation: simply loosen the four screws on the handlebars, pull the handlebar head out of the steering column, and then plug in the chip (see photos). Simple operation: After easy installation, the speed limit must be removed before each ride by pressing the button on the odometer 6 times. Simple and discreet: Thanks to the easy and uncomplicated installation, the board can be removed just as easily and without leaving a trace. After switching off the e-scooter, the 20 km/h limit becomes active again, and it must be removed again after switching it back on by pressing the button on the odometer 6 times. Compatibility: The chip is compatible with the following models – Technostar TES 200, Trekstor e.Gear 31, Trekstor EG3168, and Trekstor EG3178.

EAN CODE 4270001620668

Important information: in Poland, according to regulations, the maximum permitted speed for an electric scooter in public traffic is 20 km/h. Modifications that increase speed may lead to the loss of type approval, invalidation of the warranty, and insurance problems in the event of an accident. Therefore, any changes should only be used on private property and at your own risk.